SPACAR Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== SPACAR Light ======

===== Getting started =====

Before delving into the exact MATLAB syntax for running a simulation, it's good to consider the concept of a flexible multibody model and how SPACAR Light ties into that.

==== Flexible multibody model ====
In general, a multibody model is a collection of bodies that are interconnected. Such a model typically represents a mechanism, a linkage or a structure. The bodies could be fully rigid, or have some flexibility. The points of interconnection typically represent the joints (revolute joint, spherical joint, etc.) or contact points of the system. 

|  {{:staubli.jpg?nolink&200}}  |  {{:generalmultibody.png?nolink&400}}  |
|  //Example of a serial robot arm [1]//  |  //Schematic multibody model [2]//  |


With a description of the geometry of the bodies, the material properties, and some kind of input to the model, the behavior of the entire multibody model can be simulated. This way, the actual system that the multibody model represents can be analyzed in terms of e.g. 
  * kinematics (position, velocity and acceleration),
  * statics (deflection and stress due to applied forces), 
  * natural frequencies and buckling loads, and
  * fully time-dependent dynamic behavior.
==== Elements and nodes ====
In SPACAR (as in most other finite element and multibody software), the bodies are usually referred to as //elements//, and the points of interconnection as //nodes//. The full version of SPACAR features a range of different elements for modeling a variety of systems. While powerful, this does increase the complexity of creating a model.

In SPACAR Light, we're only considering one type of element: the 3-D flexible beam element. Also, the type of analysis is only going to be static (including natural frequencies and buckling loads). Both choices are well suited to the analysis of flexure mechanisms and reduce complexity for the user.

|  {{::img_2971.jpg?nolink&200|}}  |  {{:spavisual.png?nolink&200|}}  |  {{:paral-draw.png?nolink&200|}}  |
|  //Parallel flexure mechanism//  |  //Drawing//  |  //Schematic multibody model//  |
==== General usage ====
When SPACAR Light is installed correctly, it is typically invoked using the MATLAB command
<code matlab>
out = spacarlight(nodes,elements,nprops,eprops)
</code>
With the basic concept of a multibody model outlined above, this command is already very revealing; it shows that the user has to provide four inputs:

  - Coordinates of the nodes in ''nodes''
  - Elements that connect the nodes in ''elements''
  - Node properties (such as boundary conditions, applied loads and inertia) in ''nprops''
  - Sets of element properties (such as dimensions, material constants and flexibility) in ''eprops''

Generally, these input argument are straight-forward. On the following pages, each input will be detailed. There is a [[walkthrough|walkthrough example]] in which all steps towards a simulation are explained. For complete reference, the [[full_syntax|full syntax list]] provides details of each field and property. Additional [[spacar_light_examples|examples]] of models are also available.

==== References ====
//1: figure from staubli.com (Stäubli TX2-90 Product leaflet)//

//2: figure from lecture slides Dynamics of Machines, J.B. Jonker, R.G.K.M. Aarts//
SPACAR Wiki

User Tools

Site Tools

Page Tools
